This is the ISC News Page. In here we make product announcements of ISC products, provide test results for ISC products, test results for after market products, and much more. We hope you enjoy the new content. Comments and suggestions may be directed to:
info@customrebreathers.com.
Recent Dive Show Brochures
Product Test Announcements and Test Results:
- APECS 2.5 Compliance Testing Product and FCC mark.pdf
The APECS 2.5 Electronics has successfully passed the required EMI, EMC, and FCC testing.
See these summary extracts from the test reports.
EMC Test Summary Extracts
FCC and Industry Canada Test Summary Extracts
Here's some photos of the EMI test facility taken from an earlier preliminary test trip.
- APECS 2.5 Oxygen Injection Algorithm meets EN14143 "Partial Pressure Oxygen Set Point Control".
The algorithm was tested in an APECS 2.05 beta software in an APECS 2 electronics unit on 20 April, 2006
at ANSTI at a fixed pO2 of 1.2 bar. See Summary results of test report.
- Scrubber Performance Testing at 75 RMV performed at ANSTI and HSL Test Results Announcement.
Units Tested:
Here's some photos of the Health Safety Lab in the UK.
- Golem Gear BOV Test Results Announcement. .
Here are test summary extracts on the Golem Gear BOV
- Golem Gear Radial Test Results Announcement. .
Here are test summary extracts on the Golem Gear Radial
-
Juergensen Marine Hammerhead Electronics Test Results Announcement.
For quality assurance, ISC routinely tests each production and test head in our pressure pot to document the electronics performance before the completed system ships to the customer. This testing shows us the performance of the electronics, oxygen injection system, and the installed oxygen sensors. This same testing applies to all electronics heads that come to ISC for repairs and upgrades. For this test, the Hammerhead Electronics were tested in the pressure pot before and after the EMI/EMC/ESD testing.
Here are test summary reports of the Juergensen Marine Hammerhead Electronics: