ISC Testing

In the interest of educating our diving public, the following charts describe the various EMI/EMC/ESD testing requirements in the industry for electronics. These are very detailed wall charts, describing the various IEC standards, whats involved in the testing, and illustrated descriptions of the tests. Credit goes to TESEQ for providing the charts for use in the public domain.

• RF Emission Testing
• LF and RF Immunity Testing
• Transient Immunity Testing

Product Testing:

• ISC stresses the Importance of Testing Standards.
  
  The APECS 2.5 Electronics has successfully passed the required EMI, EMC, and FCC testing.
  
• APECS 2.5 Compliance Testing Product and FCC mark.pdf
  The APECS 2.5 Electronics has successfully passed the required EMI, EMC, and FCC testing.
  See these summary extracts from the test reports.
  EMC Test Summary Extracts - APECS 2.5
  EMC Test Summary Extracts - APECS 2.5A with Shearwater Pursuit
  EMC Test Summary Extracts - APECS 2.5A with Liquivision X1
  FCC and Industry Canada Test Summary Extracts - APECS 2.5
  FCC and Industry Canada Test Summary Extracts - APECS 2.5A
Here's some photos of the EMI test facility taken from an earlier preliminary test trip.


• APECS 2.5 Oxygen Injection Algorithm meets EN14143 "Partial Pressure Oxygen Set Point Control".
  The algorithm was tested in an APECS 2.05 beta software in an APECS 2 electronics unit on 20 April, 2006
  at ANSTI at a fixed pO2 of 1.2 bar. See Summary results of test report.


• Scrubber Performance Testing at 75 RMV performed at ANSTI and HSL Test Results Announcement.
  Units Tested:
  
  • MEG Axial Scrubber Canister
  • MEG Radial Scrubber Canister
  • Cis Lunar Radial Scrubber.
  • Micropore Extend Air RPC Scrubber.
  • Prism Radial Scrubber.
  Here are some photos of the Health Safety Lab in the UK.
  
  
• Golem Gear BOV Test Results Announcement. .
  Here are test summary extracts on the Golem Gear BOV

Last Update: 06 OCT 2010